Archive for the ‘Windows Phone 7’ Category

SBS 2008 / 2011 adding an SSL certificate

[Note: some links point to SBS 2008 configurations, some to SBS 2011, the procedure is the same for both]

Just a quick comment to address the many internet posts suggesting that SBS requires a multi-name SSL certificate (UCC – Unified Communications Certificate).  This is not true.  SBS is designed to use a simple, inexpensive, single name certificate, and it is quite easy to install.  A basic GoDaddy or other vendor certificate is all that is required.  Sean Daniel outlines the process very nicely in his post entitled “Installing a GoDaddy Standard SSL Certificate on SBS 2008 “.  Keep in mind the FQDN for your site as recorded in your public DNS records, the certificate name, and public name used in the “Internet Address Wizard” (see step #7), all must be exactly the same.  As a mater of fact, although it is possible to use a UCC certificate, the wizard will not install it for you, you would have to do so manually.  There is no need for the additional cost or time involved with multi-name certificates.  (The link below will take you to the Godaddy site and should have a menu bar at the top offering you a very good first year discount)

Go Daddy $12.99 SSL Sale!

The primary argument for using a UCC cert is to make use of auto-discovery.   Though you do not need auto-discovery, if you wish to make use of it you still do not need a UCC certificate.  You can in fact configure auto-discovery using a single name certificate and creating an SRV DNS record by following the ThirdTier.net instructions; “Setting up Autodiscover for SBS 2011

Alternatively, you can avoid buying an SSL certificate at all.  After running the SBS “Internet Address Management Wizard”, a self-signed certificate is generated in the SBS Share: \\SBSname\Public\Downloads\Certificate Distribution Package  .  Machines that are joined to the domain after this will have the certificate automatically installed.  If you generate a new certificate (by re-running the wizard), or have non-domain joined computers or devices, you need to manually copy and install the certificate.  To distribute / install the certificate on the PC’s, please see “How Do I Distribute the SBS 2008 Self-Signed SSL Certificate to My Users?”  This is often not as easy to do on other devices such as smart phones.  Therefore using a 3rd party certificate becomes much more attractive, as nothing has to be installed on the connecting device.

Should you have a dynamic public IP at the SBS site, I recommend reading “Using DDNS services with SBS 2008/2011” which outlines using a dynamic IP, a DDNS service, and configuring DNS and certificates.

Advertisements

Windows Phone 7 subnet calculator

On occasion I have a need to determine if a specific IP falls within a given subnet.  If for example it were an IP such as 192.168.1.80, and the network is defined as 192.168.1.0/24  (24 = subnet mask of 255.255.255.0) it is pretty obvious.  However when using classless subnetting and less common subnet masks, such as those supplied by ISP’s, it is a little more involved.  As a second example consider the IP 12.34.56.80.  Is it part of the same subnet as 12.34.56.78/29 (29 = subnet mask of 255.255.255.248) ? 

You can certainly do manual calculations using binary numbers like 00001100.00100010.00111000.01100100, or with the Internet readily at hand you can use subnetting calculators.  I recently stumbled on a great little free app for Windows Phone 7 called Network_CalculatorV2.  It is a very handy tool to have in your pocket the few times you might need it rather than searching the internet for that site you found last year, but can’t seem to find now.  It will also do pings to IP’s and DNS names, but it is the network calculator that I found particularly useful and simple to use.

To download search the “Marketplace” for Network_CalculatorV2 or visit:  http://www.windowsphone.com/en-CA/apps/ad048e80-70b1-4c98-9a85-fa644150a9ff

Tag Cloud